Table of Contents
Advertisement
Voice(
When the menu is displayed on the LCD monitor, pressing the UP button makes the menu
cursor move up.
When the menu is not displayed on the LCD monitor, the UP button operates as the voice
memo button. You can add your audio to a stored still image.
Adding a Voice Memo to a Still Image
1. Press the LEFT/ RIGHT button to select an image that
you wish to add sound to.
2. Press the voice memo button (
memo indicator will display. The camera is now ready to
record a voice memo.
3. Press the shutter button to start recording. The [REC]
message will be displayed on the LCD monitor
(as shown) and your voice will be recorded to the still
image for 10 seconds.
4. The recording can be stopped by pressing the shutter
button again.
5. The (
) icon will be displayed on the LCD monitor
after voice memo recording has finished.
-Voice memos can't be recorded onto movie clip files.
- A distance of 40cm between you and the camera
(microphone) is the best distance to record sound.
- The voice memo will be saved in *.wav format, but has
the same file name as the still image to which it
corresponds.
- If you add a new voice memo to the still image that already has a voice memo, the
existing voice memo will be erased.
46
) memo / Up button
) and the voice
START:SHUTTER
REC
STOP:SHUTTER
REC
Hide quick links:
Advertisement
Table of Contents
