Using The Turbo Function - Samsung ND022QHXEA User Manual

using advanced functions

USING THE TURBO FUNCTION

Turbo function will be helpful to cool or heat your room quickly and effectively by operating at the maximum
fan speed for 30 minutes.
1. Turn on the air conditioner.
Press the Power
2. Set the operating mode.
Press the Turbo button on the remote control until
Turbo indicator appears on the remote control display.
The air conditioner operates in Turbo fan speed and
automatically adjusts the temperature according to the
current room temperature. The unit operates for
30 minutes and then operates in last used mode, or in
Auto mode if Dry/Fan mode is most recent mode used.
Turbo function is only available in Auto/Cool/Heat mode. If Turbo function is selected in
Dry/Fan mode, operating mode changes to Auto.
To deactivate Turbo function
1. Press the Turbo button on the remote control again.
The air conditioner operates in last used mode, or in Auto mode if Dry/Fan mode is most
recent mode used.
• When you are using the remote control, make sure corresponding indicator appears on
the remote control display.
• Temperature/Fan speed cannot be adjusted while using this function.
• Air flow can be adjusted manually.(See page 19 for instructions.)
• When the Turbo function is activated, pressing Mode button will automatically cancel the
function.
20_ using advanced functions
ND£ª£ª£ªQHX£ª£ª_IB IM_32064A_E_4.08.10.indd 20
& Set/Cancel button on the remote control.
2010-4-8 10:52:27