Table of Contents
Advertisement
operating basic function
TURNING THE AIR CONDITIONER ON AND OFF
Press the Power
You will hear a ringing sound and the air flow blade will move up and
down automatically when the air conditioner is properly on.
The air conditioner will operate in the most recent operation mode used
or Auto mode.
When you turn off the air conditioner, air flow blade will stop moving and
remain closed.
Turning on/off your air conditioner without the remote control.
You can operate your air conditioner by pressing the Power
side(028/036) or on the digital display of the air conditioner(056/071).
SELECTING OPERATION MODE
Auto
In Auto mode, the air conditioner will automatically set the temperature and fan speed depending
on the room temperature detected by the room temperature sensor.
1. Turn on the air conditioner.
Press the Power
2. Set the operating mode.
Press the Mode button on the remote control until Auto
mode and Auto fan speed indicator appear on the remote
control display.
The air conditioner will automatically set the operation
mode to Cool or Heat depends on the room temperature.
When you press the Mode button, mode will change
in order of Auto, Cool, Dry, Fan and Heat.
3. Set the Temperature.
Press the Temperature or button on the remote
control to decrease or increase the desired temperature.
You can set the desired temperature between
the range of 16˚C~30˚C.
You can decrease/increase the temperature by 1˚C.
• When the air conditioner is already operating in another mode, press the Mode button
until Auto mode indicator appears on the remote control display.
• When you are using the remote control, make sure correct indicator which matches your
selection appears on the remote control display.
• Air flow can be adjusted manually.(See page 21 for instructions.)
16_ operating
AVXWB£ª£ª_IB IM_E_29815.indd 16
button on the remote control.
button on the remote control.
button on the bottom right
2008-11-12 10:11:37
Advertisement
Table of Contents
