Table of Contents
Advertisement
Remote control display
Fan speed indicator
Using the remote control
• Point the remote control towards the remote control sensor of the unit.
• When properly pressing the button on the remote control, you will hear beep sound
• The signal may not be received well of electronic lighting style fluorescent lamps,
• If other electrical products operate by the remote control, call your nearest contact
Installing the batteries
1. Slide the cover, on the
rear side of the remote
control, down to open.
(Applicable in the European Union and other European countries with separate battery return systems.)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of
with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate
that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are
not properly disposed of, these substances can cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of waste and
recycle them through your local, free battery return system.
AVXWB£ª£ª_IB IM_E_29815.indd 15
Set temperature
indicator
indicator
indicator
On/Off Timer
indicator
from the unit.
such as inverter fluorescent lamps are in the same space.
center.
2. Install two AAA batteries.
Check and match the "+"
and "-" signs accordingly.
Make sure you have installed
the batteries in correct
position.
Correct disposal of batteries in this product
Air swing indicator
Operating mode
indicator
Turbo indicator
Energy saving
indicator
Transmit indicator
Low battery
indicator
3. Close the cover by sliding
it back to its original
position.
You should hear click sound
when the cover is locked
properly.
viewing _15
2008-11-12 10:11:26
Advertisement
Table of Contents
