Neste trinn
1. Sett inn
WLAN
2. Sett inn
batteriet
3. Sett på bunndekselet.
4. Sett inn
SD-minnekortet
5. Følg fremgangsmåten i
Kamera
Removing the camera
Prerequisites
1. Follow the procedure in
2. Remove the
SD memory card
3. Remove the
base cover
4. Remove the
battery
5. Remove the
WLAN
6. Remove the
display assembly
7. Remove the
display bezel
8. Remove the
display panel
Steps
1. Using a plastic scribe, gently pry the camera off the display back-cover [1].
2. Disconnect the camera cable from the camera module [2].
3. Lift the camera module from the display back-cover [3].
etter at du har arbeidet inne i
before working inside your computer
datamaskinen.
Ta ut og installere komponenter
97