Neste trinn
1. Sett inn skjermpanelet.
2. Sett på skjermrammen.
3. Sett på skjermenheten.
4. Sett inn
WLAN
5. Sett inn
batteriet
6. Sett på bunndekselet.
7. Sett inn
SD-minnekortet
8. Følg fremgangsmåten i
Strømadapterport
Removing the power adapter port
Prerequisites
1. Follow the procedure in
2. Remove the
SD memory card
3. Remove the
base cover
4. Remove the
battery
5. Remove the
WLAN
Steps
1. Disconnect and route the power adapter cable from the system board [1, 2].
2. Remove the single (M2x3) screw that secures the power adapter port to the palmrest and keyboard assembly [3].
3. Lift the power adapter port, along with its cable, off the palmrest and keyboard assembly [4].
etter at du har arbeidet inne i
before working inside your computer
datamaskinen.
Ta ut og installere komponenter
95