Kolejne kroki
1. Zainstaluj
kartę sieci
WLAN.
2. Zainstaluj akumulator.
3. Zainstaluj
pokrywę
dolną.
4. Zainstaluj
kartę pamięci
5. Wykonaj procedurę opisaną w części
Kamera
Removing the camera
Prerequisites
1. Follow the procedure in
2. Remove the
SD memory card
3. Remove the
base cover
4. Remove the
battery
5. Remove the
WLAN
6. Remove the
display assembly
7. Remove the
display bezel
8. Remove the
display panel
Steps
1. Using a plastic scribe, gently pry the camera off the display back-cover [1].
2. Disconnect the camera cable from the camera module [2].
3. Lift the camera module from the display back-cover [3].
98
Wymontowywanie i instalowanie komponentów
SD.
Po zakończeniu serwisowania
before working inside your computer
komputera.