Næste trin
1. Genmonter
skærmpanelet
2. Genmonter
skærmfacetten
3. Genmonter
skærmmodulet
4. Genmonter
WLAN
5. Udskift
batteriet
6. Genmonter
bunddækslet
7. Genmonter
SD-hukommelseskortet
8. Følg proceduren i
Efter du har udført arbejde på computerens indvendige dele
Strømadapterport
Removing the power adapter port
Prerequisites
1. Follow the procedure in
2. Remove the
SD memory card
3. Remove the
base cover
4. Remove the
battery
5. Remove the
WLAN
Steps
1. Disconnect and route the power adapter cable from the system board [1, 2].
2. Remove the single (M2x3) screw that secures the power adapter port to the palmrest and keyboard assembly [3].
3. Lift the power adapter port, along with its cable, off the palmrest and keyboard assembly [4].
94
Sådan fjernes og installeres komponenter
before working inside your computer