Makita DUR190U Instruction Manual page 15

2. Place handle between handle clamp and handle
holder. Adjust the handle to an angle that provides a
comfortable working position and then secure with hex
socket head bolts.
1
2
► 1 . Hex socket head bolt 2. Handle clamp 3. Handle
holder
Attaching the barrier
For DUR190L and DUR191L (country specific)
If the barrier is included in your model, attach it to the
handle using the screw on the barrier.
► 1 . Barrier 2. Screw
CAUTION:
After assembling the barrier, do
not remove it. The barrier works as a safety part
to prevent you from contacting the cutting blade
accidentally.
3
1
2
Mounting the attachment pipe
For DUR191U and DUR191L only
Mount the attachment pipe to the power unit.
1. Turn the lever to the direction of the arrow shown
in the figure.
► 1 . Lever
2. Pull up the joint cover and insert the attachment
pipe while aligning the protrusion on the pipe (cutting
tool side) with the concave portion of the joint part.
► 1 . Lock lever 2. Joint cover 3. Pipe
Make sure that the surface of the lock lever is parallel
to the pipe.
3.
Turn the lever to the direction of the arrow shown
in the figure.
► 1 . Lever
15 ENGLISH
1
2
1
1
3