5. Walking test
The walking test is used to test the detection area
and to restrict it if necessary.
Turn the time potentiometer (min.) counterclock-
¾
wise up to the stop.
The motion detector now only reacts to movements
(independent of brightness).
Go diagonally to the detection area. After the
¾
motion detector has detected a movement, it
switches on for 2 s.
Pay attention to the direction of motion during
¾
the test.
Dusk
Test mode
6. Alignment
•
The sensor can be rotated to left/right and
down by 90 °.
Time
2 sec
0
2
Sec
10