1. Basic safety information WARNING Danger of death through electric shock or fire! Installation should only be carried out by ¾ ¾ a qualified electrician! • The LED spotlight conforms to EN 60598-1 if correctly installed • Only intended for installation outside of arm's reach Proper use •...
2. Description Mounting bar adjustable LED spotlight with LEDs 3. Connection WARNING Danger of death through electric shock! Disconnect power source ¾ Ensure device cannot be switched on ¾ Check absence of voltage ¾ Earth and bypass ...
Do not touch the metal parts. The device can get ¾ hot. Do not install on flammable surface. ¾ 4. Installation Ensure installation height of 2.5 m ¾...
Page 5
Disconnect power source ¾ ¾ Ø 6 mm Make marks for the holes and drill the holes ¾ Tighten the mounting bar ¾ ¾ Feed cable through the seal of the base ¾...
Page 6
Fix cord grip and tighten screws ¾ ¾ Connect the individual wires to the appropriate ¾ terminal ¾ external brown conductor neutral blue conductor mains green/yellow earth Tighten screws ¾ ¾...
Click Push Place and engage the cover on the LED spotlight ¾ Place the LED spotlight on the mounting bar and ¾ tighten screws Connect LED spotlight to mains ¾ 5. Alignment The LED spotlight can be rotated up by 45 ° and down by 60 °.