Operating Controls; Tool Specification; General Safety Rules - IVT CP-120 Manual

Manual instruction

Operating controls

1. On/off switch
2. Motor housing
3. Polishing pad
4. Handle
5. Counterweightterry
Symbols
EN

Tool specification

Voltage/Frequency [V~Hz]
Rated power [W]
No-load speed [RPM]
Polishing pad diameter [mm]
Sound pressure [dB(A)]
Sound power [dB(A)]
Vibration level [m/s2]
K [dB]
Weight [Kg]
Safety class
Safety regulation for the use

General safety rules

This model of electric car polisher (CP-120) is
intended for polishing and applying wax to
the external structure body of cars. It helps you
removing dirt, grease and to brighten up the paint
of your car.
The following listed safety instructions should serve
you for the right use and for the protection of your
own safety. Therefore please read this very carefully.
When passing this tool to a third person, these
instructions must be handed too.
Retain this user manual and all other literature
supplied with your tool for any future reference.
Comply with the safety information and the
warnings on the tool.
Be familiar with the controls and the proper use of
a. Terry cloth bonnet*
b. wool bonnet*
model
* Optional extras
Not all of the accessories
illustrated or described are
included as standard delivery
CP-120
230~50
120
3000
240
58
72
14.8
3
2.5
II
the tool before attempting to use it and above all,
make sure you know how to stop to use it in case
of emergency.
Following these simple instructions will also
maintain your tool in good working order.
• The tool must be assembled correctly before use.
• Only use the tool for its designed purposes.
• In addition to the design of the tool there may
be safety decals that must be considered and
indications about the safety equipment to use.
The prevention of accidents is dependent upon
the awareness, common sense and proper training
of everyone involved in the operation, transport,
maintenance and storage of the tool.
• Never leave the tool unattended.
• Never allow children to use the tool. Children
should be supervised to ensure that they do not
play with the tool.
8