slotted screwdriver to remove the screw.
fig.9
4. Remove the polishing pad (3) and replace it with
a new one.
5. Re-place the screw and tighten and remove the
screwdriver to allow the polishing pad (3) to rotate
freely.
Cleaning the appliance
•
Use mild soap and a damp sponge to clean the
polisher.
•
Do not immerse any part of the tool in liquid.
•
If the polisher needs repair, only use identical
replacement parts.
Environmental protection
Recycle raw materials instead of
disposing as waste.
Machine, accessories and packaging should be
sorted for environment-friendly recycling.
The plastic components are labelled for categorized
recycling.
These instructions are printed on recycled paper
manufactured without chlorine.
13
Manual instruction
EN