Wheel Gears/Pawl Service; Brush Replacement - P.Lindberg 9050619 Original Manual

Wheel gears/pawl service

DO NOT remove both wheels at the same time. Remove one wheel at a time to
prevent mixing parts or using the wrong parts as the left and right wheels and parts
are different. When removing gears, carefully note the position of all washers and
other parts.

Brush replacement

1. Remove the hopper bag from lawn sweeper.
2. Only replace one brush at a time.
3. Tip the sweeper forward on housing. Do not remove the hex bolts from double
brush retainers.
4. Loosen hex bolts and hex lock nuts from single brush retainers. Slide brush out of
retainers, making note of over-lap bristles position.
5. Install new brush, make sure the over-lap bristles are in the same position as before
replacement.
P. Lindberg A/S
Tlf: 70212626
11
Sdr. Ringvej 1
DK-6600 Vejen
MAN 9050619 EN V1
www.p-lindberg.dk
e-mail: salg@p-lindberg.dk