Attach The Sweeper To The Towing Vehicle; Adjust The Height Of The Brushes; Towing The Sweeper; Dumping The Hopper - P.Lindberg 9050619 Original Manual

Attach the Sweeper to the Towing Vehicle

On a level surface, line up the towing vehicle with sweeper. Use the hitch pin and
spacers to adjust the height of the tow hitch, as shown in the diagram. Once adjusted,
insert the R Pin Ø3 to secure the hitch pin. For best results, the hopper should be level
with the ground at a minimum clearance of 5". Secure the rope to the tow vehicle.

Adjust the Height of the Brushes

Use the height adjustment handle to set the height of the brushes. For optimal
results, the brush height should be ½" below the tips of the grass. For sweeping other
materials, you may need to adjust the height of the brushes.

Towing the Sweeper

Your sweeper is designed to work at speeds of 5mph and lower. You may damage the
device or experience sub-optimal results if exceeding 5mph. Your sweeper will work
best on flat, smooth surfaces. If operating on a slope, always tow the sweeper up or
down the surface of the hill, not sideways along the slope.

Dumping the Hopper

When dumping the hopper, use the rope to pull the basket forward. Dump the
hopper regularly for best performance.
9 MAN 9050619 EN V1
P. Lindberg A/S Sdr. Ringvej 1 www.p-lindberg.dk
Tlf: 70212626 DK-6600 Vejen e-mail: salg@p-lindberg.dk