Ariens IKON-X 42 Operator's Manual page 26

52" Decks
2
1. Idler Arm
2. Belt Finger
Figure 25
60" Decks
2
2
1. Idler Arm
2. Belt Finger
Figure 26
6. Remove deck drive belt.
Install Deck Drive Belt
See Figure 27 and Figure 28.
1. Install deck drive belt.
IMPORTANT: Belt will not have tension until
routed around drive pulley and idler arm is
reinstalled.
2. Reinstall idler arm and belt fingers.
2
1
52" Decks
42" and 60" Decks
1
3. Connect idler spring. See Figure 29,
Figure 30 and Figure 31.
EN - 24
Figure 27
Figure 28
42" Decks
Figure 29