In The Document Feeder - Samsung SF-760P User Manual

Media and tray
The printed pages stack on the output tray. The printer sends output to the
output tray by default.
8
Preparing originals
• Do not load paper smaller than 142 x 148 mm (5.6 x 5.8 inches) or larger than
216 x 356 mm (8.5 x 14 inches).
• Do not attempt to load the following s of paper, in order to prevent paper
jam, low print quality and machine damage.
- Carbon-paper or carbon-backed paper
- Coated paper
- Onion skin or thin paper
- Wrinkled or creased paper
- Curled or rolled paper
- Torn paper
• Remove all staples and paper clips before loading.
• Make sure any glue, ink, or correction fluid on the paper is completely dry
before loading.
• Do not load originals that include different sizes or weights of paper.
• Do not load booklets, pamphlets, transparencies, or documents with other
unusual characteristics.
9
Loading originals
You can use the document feeder to load an original for copying, scanning, and
sending a fax.

In the document feeder

Using the document feeder, you can load up to 20 sheets of paper (80 g/m2, 20
lbs bond) for one job.
1 Flex or fan the edge of the paper stack to separate the pages before
loading originals.
2. Menu Overview and Basic Setup
44