Fax Features - Samsung SF-760P User Manual

Fax features

• For basic scanning features, refer to the Basic Guide (see "Basic faxing" on
page 68).
• This feature may not be available depending on model or optional goods
(see "Features by models" on page 7).
24
Automatic redialing
When the number you have dialed is busy or there is no answer when you send
a fax, the machine automatically redials the number. The redial time depends on
the country's factory default setting.
When the display shows Retry Redial?, press
number without waiting. To cancel the automatic redialing, press
Clear).
To change the time interval between redials and the number of redial attempts.
1 Press (fax) > (Menu) > Fax Setup > Sending on the control
panel.
Select Redial Times or Redial Term you want.
2
Select the option you want.
3
(Start) button to redial the
(Stop/
25
Redialing the fax number
1 Press (Redial/Pause) on the control panel.
2 Select the fax number you want.
Ten recently sent fax numbers with ten received caller IDs are shown.
When an original is loaded in the document feeder, the machine
3
automatically begins to send.
26
Confirming a transmission
When the last page of your original has been sent successfully, the machine
beeps and returns to ready mode.
When something goes wrong while sending your fax, an error message appears
on the display. If you receive an error message, press
the message and try to send the fax again.
You can set your machine to print a confirmation report automatically each
time sending a fax is completed. Press
Setup > Sending > Send Report on the control panel.
(Stop/Clear) to clear
(fax) > (Menu) > Fax
157
3. Special Features