Samsung SCX-4833FD User Manual page 330

Operating system problems
4
Common PostScript problems
The following situations are PS language specific and may occur when several printer languages are used.
Problem
The PostScript file cannot
be printed
Limit Check Error report
prints
A PostScript error page
prints
The optional tray is not
selected in the driver
When printing a document
in Macintosh with Acrobat
Reader 6.0 or higher,
colors print incorrectly
Possible cause
The PostScript driver may not be installed
correctly.
The print job was too complex.
The print job may not be PostScript.
The printer driver has not been
configured to recognize the optional tray.
The resolution setting in the printer driver
may not be matched with the one in
Acrobat Reader.
• Install the PostScript driver (see "Software installation" on page 4).
• Print a configuration page and verify that the PS version is available
for printing.
• If the problem persists, contact a service representative.
You might need to reduce the complexity of the page or install more
memory.
Make sure that the print job is a PostScript job. Check to see whether
the software application expected a setup or PostScript header file to
be sent to the machine.
Open the PostScript driver properties, select the Device Options tab,
and set the tray option.
Make sure that the resolution setting in your printer driver matches
the one in Acrobat Reader.
6. Troubleshooting
Solution
170