Menu Overview - Samsung SCX-4623FN User Manual

NETWORK
You may set up the network with the machine's display screen. Before doing
that, you must have the relevant information concerning the type of network
protocols and computer system you use. If you are not sure which setting to
use, contact your network administrator to configure this machine to the
network.
1. Press Menu on the control panel.
2. Press the left/right arrow until Network appears and press OK.
3. Press the left/right arrow until the setup option you want appears and
press OK.
4. Press the left/right arrow until the setting you want appears and press
OK.
5. Repeat steps 3 through 4, as needed.
6. Press Stop/Clear to return to ready mode.
OPTION
TCP/IP (IPv4) Select appropriate protocol and configure
parameters to use the network environment.
There are lots of parameters to be set;
therefore, if you are not sure, leave as is,
or consult the network administrator.
TCP/IP (IPv6) Selects this option to use the network
environment through IPv6 (See "IPv6
Configuration" on page 39).
Ethernet Speed Configure the network transmission speed.
Clear Setting Reverts the network settings to the default
values.
Network Info This list shows information on your machine's
network connection and configuration.
DESCRIPTION
Machine status and advanced feature_ 80

MENU OVERVIEW

The control panel provides access to various menus to set up the machine
or use the machine's functions. These menus can be accessed by pressing
Menu.
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine.
ITEMS
Fax Feature Darkness
Resolution
Multi Send
Delay Send
Priority Send
Forward
Secure Receive
Add Page
Cancel Job
Fax Setup Sending
Redial Times
Redial Term
Prefix Dial
ECM Mode
Send Report
Image TCR
Dial Mode
Receiving
Receive Mode
Ring To Answer
Stamp RCV Name
RCV Start Code
Auto Reduction
Discard Size
Junk Fax Setup
DRPD Mode
Change Default
Resolution
Darkness
Auto Report
Copy Feature Reduce/Enlarge
Darkness
Original Type
Layout
Adjust Bkgd.
Copy Setup Scan Size
Change Default
Copies
Copy Collation
Reduce/Enlarge
Darkness
Original Type
OPTION