Sony Walkman CE-P13 Operating Instructions Manual page 23

Other Information (continued)
Symptom Cause/Remedy
Distortion occurs in the sound When recording a sound by connecting the headphone output of
other equipment to the  (Headphone / AUDIO IN) jack of your
recorded from other equipment.
player, distortion may occur if the volume level of the connected
equipment is too high. Set a suitable volume level before
recording. Also, it is recommended that you fi rst perform test
recording to check volume.
On the display window
Symptom Cause/Remedy
"?" is displayed for a title. Characters that cannot be displayed on your player are used.
 Transfer fi le back to the computer and then use Windows Media
Player, etc., to rename the title with appropriate characters.
Lyrics are not displayed Characters that cannot be displayed in the language setting on your
correctly. player are used.
 When the language is set to "Traditional Chinese" (page 36),
the lyric fi le of the Traditional Chinese character set is
necessary.
On charging the battery
Symptom Cause/Remedy
Battery life is short. • The operating temperature is below 5ºC (41ºF).
 Battery life becomes shorter due to the battery characteristics.
This is not malfunction.
• The battery is required to be replaced.
 Call the consultation hot line: 800-820-9000.
44
On the connection with the computer
Symptom Cause/Remedy
"USB mode" is not displayed • Another application is running on the computer.
 Wait for a while and reconnect the USB cable. If the problem
when connected to the computer
with the supplied USB cable. persists, disconnect the USB cable, restart the computer, and
then reconnect the USB cable.
• The supplied USB cable has disconnected.
 Connect the supplied USB cable.
• A USB hub is used.
 Connecting via a USB hub is not guaranteed. Connect the
supplied USB cable directly to the computer.
Your player is not recognized by The supplied USB cable is disconnected.
 Connect the supplied USB cable.
the computer when it is
connected to the computer.
A fi le(s) cannot be transferred to • The supplied USB cable is not connected properly.
 Connect the USB cable properly.
your player.
• There is not enough free space in the built-in fl ash memory.
 Transfer any unnecessary fi les back to your computer to
increase free space.
• You have already transferred the maximum 65,535 fi les to the
built-in fl ash memory.
 You can transfer up to 65,535 fi les to the built-in fl ash
memory.
45