Samsung SPF-83V Manual page 38

sound for MPEG4 and WMV9 movies.
The screen is displayed but there is no
sound for MPEG4 and WMV9 movies.
The movie freezes at some points.
Whenever I turn my Digital Photo Frame
off and on, I find the time goes wrong.
A menu is not displayed immediately
when I press the menu button.
My Digital Photo Frame does not retrieve
photos from the Internet.
Cannot display web photos during online
services.
Cannot change the image ratings in the
Windows Media Center in real time.
Cannot change the ratings for the photos
on my PC from my Digital Photo Frame.
I changed the frame name but it hasn't
been applied.
I cannot connect my Digital Photo Frame
to the Windows Media Player on my PC.
The Frame Manager icon isn't displayed.
Troubleshooting
|
Terminology
Terms
MPEG4
(Motion Picture Expert Group4)
to the next file depending on the file size and format.
Try to change the Volume menu using the buttons on the right side of the
product.
Freezing may happen depending on the status of the movie file.
Breakings could happen during playback depending on the type and size of
movie file.(High bps contents)
Movie file formats : MPEG 4, WMV9
Resolution : Less than 1024 x 768
This product has no built-in battery. When the power turns off, the time info
also goes off. Therefore, you need to set time again whenever your Digital
Photo Frame turns on. However, if you are connected to the Internet and
Settings > Internet time update is set to Auto, the time is updated
automatically. (Settings>Internet Time Update)
Displaying the menu and other operations may take some time while the
product is loading an image to display on the screen.
Check whether the AP connected to your Digital Photo Frame is accessible to
the Internet.
The maximum file size from the Internet is 4.2 MB. (The maximum local file
size is 8.5 MB.)
Receiving photos over the internet The Web and Feed file format is JPEG only
(over 400X240 pixels)
It is possible to do so by closing and opening Windows Media Player again.
Frame Manager must be running first.
After making changes, close and open Windows Media Player again
Select and remove the shared Digital Photo Frame from the Library/Media
Sharing list in the Windows Media Player and turn both your Digital Photo
Frame and PC off and on. Make sure to turn on your Digital Photo Frame after
your PC has booted up.
Check whether both your Digital Photo Frame and PC are connected to the
same access point (AP).
In Vista, select Control Panel > Network and Sharing Center > Customize.
Check whether the Location type is set to Private.
(For more information, refer to
Accepting Connections from Your Photo Frame.)
Select Digital Photo Frame from the Windows Media Player > Library > Media
Sharing list. Check whether it is set to Allow.
Check whether a Digital Photo Frame is connected. If no Digital Photo Frame is
connected, the icon is not displayed.
Terminology Service Centers
| |
MPEG4 is a movie compression technology for video communications which
enables implementing bi-directional multimedia. It was developed to make it
possible to transmit movies over low speed lines on the Internet or for mobile
communications. It is used widely on PCs, TVs and cell phones. A movie file
Applications > Sharing Settings for
Declaration of
|
Description
|
Conformity