Samsung SPF-83V Manual page 33

Connect USB
memory card
to PC
Connect USB
Memory Card
to Digital
Photo Frame
Select Update
Updating
I want to connect to a monitor by using Mini-Monitor program.(Windows XP only)
To use your digital photo frame as a Mini-Monitor (the secondary monitor) using a USB cable.
Installing Frame Manager
Frame Manager User's Manual
Using your digital photo frame as a Mini-Monitor.
Using your digital photo frame as Mass-Storage.
Changing the current mode to another mode
Adjusting the brightness
Updating the firmware
System Requirements
OS : Windows XP SP2
System Processor Speed : 1.5 GHz
USB : Extended Host Controller (EHCT) for USB 2.0
RAM : 256 MB or above
Caution
1. Windows XP Service Pack 2 must be installed.
It might not operate with any operating systems other than Windows XP SP2. We are not liable for problems that may
occur when installing it on an operating system other than Windows XP SP2.
2. We recommend a CPU speed of 2.4 GHz or higher.
Your digital photo frame might not operate normally if the performance specifications of your PC are lower than the
recommendations.
3. Make sure to install it correctly as directed in the Installation Guide.
4. Do not use your Mini-Monitor as a primary monitor.
We are not liable for any problems that may occur if you do not follow the directions. If it is used as a primary monitor,
the screen may be blank.
5. Make sure to use the provided USB cable.
6. When using your digital photo frame as a Mini-Monitor, all buttons except for the Power button will not operate.
7. Move the programs displayed and used on the Mini-Monitor to the primary monitor after you have finished using it.
8. With some video cards, Mini-Monitor may not operate normally. In this case, set Hardware acceleration to Full.
To set Hardware acceleration to Full: Right-click on the Windows Desktop and select Properties from the displayed
menu. The Display Properties window appears. Click the Settings > Advanced > Troubleshoot tab. Move the
Hardware acceleration slide to Full.
Please visit www.samsung.com
If you are ready, connect the USB memory card to your PC.
Copy the firmware update file you downloaded to the USB memory card.
(Make sure to copy the firmware update file to the root directory.)
Remove the USB memory card from your PC, and connect it to your Digital Photo Frame.
If your Digital Photo Frame is off, turn it on.
Select Firmware Update of Settings.
The update progression is displayed on the screen.
After boot-up, turn your Digital Photo Frame off, remove the USB memory card, and turn your
Digital Photo Frame on again, for maximum safety.
Do not remove the USB memory card during the update operation.
Do not press any key during the update operation.
Do not insert any other card during the update operation.
Do not turn your Digital Photo Frame off during the update operation.
You can identify whether the update operation has finished successfully or not by checking the
firmware version of your Digital Photo Frame is changed to the version of the firmware update.
for the latest firmware update.