Connecting to a Macintosh
1. Using the D-sub (Analog) connector on the video card.
•
Connect the signal cable to the D-SUB port on the back of your monitor.
Note
Turn on the monitor and Macintosh.
Connecting to Other devices
Note
•
This monitor allows the user to connect it to such input devices as a DVD player, a VCR or cam-
corder, or a DTV or TV without disconnecting the PC.
•
The configuration at the back of the monitor may vary from product to product.
•
The DVI to HDMI cable, digital audio optic output cable, and RCA to stereo (for PC) cable are all
sold separately.
Contact a Service Center to purchase any products sold separately.
Connecting EXT.(RGB) - It only applies to AV DEVICE that supports SCART.
Note
Connect to the DVD Devices input if the device has a EXT (RGB) jack. You can watch DVD simply
by hooking up the DVD player with the monitor as long as the power is on.
Connections
[PC]