Using The Product; Plug & Play Feature - Samsung SyncMaster P2770HD User Manual

3

Using the Product

3-1 Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently.
1. Press the [POWER ] button on the remote control.
• You can also use the [
• The message <Select the OSD Language>. is displayed.
2. Press the [ ] button. Select the appropriate language by pressing the ▲ or ▼ button. Press the [
choice.
3. Press the ◄ or ► button to select <Store Demo> or <Home Use>, then the [
• We recommend setting the TV to <Home Use> mode for the best picture in your home environment.
• <Store Demo> mode is only intended for use in retail environments. If the unit is accidentally set to <Store Demo>
mode and you want to return to <Home Use> (Standard): Press the volume button on the TV. When the volume
OSD is displayed, press and hold the [MENU] button on the TV for 5 seconds.
4. Press the [ ] button. Select the appropriate country by pressing the ▲ or ▼ button. Press the [
choice.
5. Press the ▲ or ▼ button to select <Air> or <Cable>, then press the [
• <Air>: <Air> antenna signal. / <Cable>: <Cable> antenna signal.
• In Cable mode, you can select the correct signal source among <STD>, <HRC>, and <IRC> by pressing the ▲, ▼,
◄ or ► button, then press the [
Analog and Digital. Contact your local cable company to identify the type of cable system that exists in your
particular area.
6. Press the ▲ or ▼ button to select the channel source to memorize. Press the [
• When setting the antenna source to <Cable>, a step appears allowing you to set a value for the digital channel
search. For more information, refer to <Channel> → <Auto Store>.
• <Digital & Analogue>: Digital and Analogue channels.
• <Digital>: Digital channels.
• <Analogue>: Analogue channels.
• The channel search will start and end automatically.
• Press the [
• After all the available channels are stored, the message Set the <Clock Mode> is displayed.
7. Press the [ ] button.
Press the ▲ or ▼ button to select <Auto>, then Press the [
• If you select <Manual>, <Set current date and time> is displayed.
• If you have received a digital signal, the time will be set automatically. If not, select <Manual> to set the clock.
Using the Product
] button on the TV.
] button. If you have Digital cable, select the cable system signal source for both
] button at any time to interrupt the memorization process.
] button.
] button.
] button to select <Start>.
] button.
] button to confirm your
] button to confirm your
3-1