Siemens IQ500 Operating Instructions Manual page 24

24
S I E ME NS
4 The iron will shift automatically to the "allTextile"
programme. The "allTextile" indicator lamp (1)
will flash, indicating that the iron is heating up.
5 When the iron is ready to use, the indicator
lamp will remain lit continuously.
"allTextile" programme
allTextile
The iron will shift automatically to the "allTextile"
programme.
This programme sets an appropriate temperature,
which is suitable for all fabrics that can be ironed
(symbols
becoming damaged due to an unsuitable
temperature being selected.
The "allTextile" programme does not apply to fabrics
that cannot be ironed (symbol
Please check the garment care label for details or
try ironing on a part of the fabric not visible normally.
3. "startStop Control" function
After the initial heating, "startStop Control" function
switches off the iron when it is left unattended, thus
increasing security and saving energy.
1 While the handle is gripped, the iron heats up.
The "startStop Control" indicator lamp (2) will
remain lit continuously.
2 When the handle is released, the
"startStop Control" function is activated and
the iron stops heating. The "startStop Control"
indicator lamp (2) will flash.
), and prevents clothes from
).