Table of Contents
Advertisement
If you cannot use infrared communication
1. Check BIOS setup.
a. Start the computer, and press <F2> to enter System Setup.
b. Select I/O Device Configuration in the Advanced menu, and press
<Enter>.
c. Select Infrared Port, and set the item to Enabled by pressing <F5> or
<F6>.
d. Save the configuration, and exit the Setup.
2. Check Windows configuration.
a. Click Start > Control Panel > Performance and Management > System
> Hardware tab > Device Manager.
b. Double-click the "Infrared device", and then double-click "IrDA Fast Infrared
Port" item.
c. On the Advanced tab, select "Infrared Transceiver A" in the Properties field,
then select "HP HSDL-2300/3600" in the Value field.
d. Click OK.
56 Users Manual
Advertisement
Table of Contents
