Lcd Brightness Control - Samsung NP-R518 User Manual (FreeDos) User Manual

LCD Brightness Control

You can adjust the LCD brightness in 8 levels.
Before You Start!
The LCD brightness is the brightest (Level 8) when the computer is running on AC
power, and it becomes dimmer when running on battery power.
Controlling the Brightness Using the Keyboard
You can use the screen brightness control keys after installing Windows and Easy Display
Manager. (Only for Windows Vista)
Adjust the LCD brightness by pressing the Fn +(
The LCD brightness can change up to 8 levels and the brightness increases by 1 level when
pressing the Fn +(
 Maintaining the changed LCD brightness even after turning the computer on again
To maintain the LCD brightness set by using the brightness control keys or through
the Power Options, follow the procedures below.
1. Turn the computer on and press the F2 key when the SAMSUNG logo appears on
the screen to enter the BIOS Setup.
2. Select the Boot menu and set the Brightness Mode Control item to User Control.
3. Press the F10 key to save the settings and exit Setup.
 Defective LCD Pixels
An LCD panel may include less than 4 defective pixels due to a limit in the
manufacturing process and this does not affect the computer performance. The
computer's LCD panel may have the same or similar number of defective pixels as
other manufacturer's notebook computers.
Instructions for Cleaning the LCD
Clean the LCD panel with a soft cloth lightly moistened with computer cleansing
detergent moving in one direction.
Cleaning the LCD panel with excessive force can damage the LCD.
Bonn_R518_Dos_Eng.indb 62
) key once.
2
) key or the Fn +( ) key.
2009-03-25 오후 1:31:03