Samsung NP-G10 User Manual page 128

Table of Contents

Advertisement

Q7 The Taskbar on the bottom of the screen does not appear when a projector
is used as the display device.
A
A This may happen, even though SXGA LCD supports the 1280x800 mode, the
projector does not support that mode. In this case change the resolution to
1280x1024 on your computer.
Q8 When a TV is connected, the Turn off monitor power option is not per-
formed.
A
When connecting a TV after booting up your computer, the Turn off monitor
power option may not be performed. For it to operate properly, it is recommended
to connect a TV and then booting up the computer.
Q9 Although I have pressed a shortcut key on the keyboard, the setting status
does not appear on the screen.
A
The Setting status icon is only displayed when the Magic Keyboard and Samsung
Display Manager programs are installed.
Q10 The color is strange when the picture is displayed on the connected monitor
(or projector).
A
Check the monitor signal cable connection and reconnect the cable.
Q11 I have connected a TV with a cable that converts S-Video to Composite, but
the picture is displayed abnormally on the screen.
A
This system supports connecting a TV with an S-Video or Component cable but
does not support connecting a TV through a Composite interface with a cable that
converts S-Video to Composite.
Troubleshooting 109

Advertisement

Table of Contents
loading

Table of Contents