Using External Display Devices - Samsung NP-G10 User Manual

Using External Display Devices

Using external display devices such as monitors, projectors, TVs, etc allows you to
view screen images alternatively or simultaneously on each device. Additionally, you
can extend the screen onto two display devices to use a larger workspace. Using exter-
nal display devices is especially useful when you are giving a presentation or watching
a movie through your TV.
Switching Display Devices Using the Shortcut Key
You can watch the screen through either the LCD or an external display device, or you can
even watch the screen through both the LCD and an external display device simultaneously.
1. Connect the external display device (e.g. a monitor or a projector) to the corre-
sponding port of the system. To connect a TV, connect the TV to the TV output
port of the system.
2. If you press the <Fn>+<F4> key combination once, the Samsung Display Man-
ager screen appears where you can select a screen.
Whenever you press the <F4> key while pressing the <Fn> key, selection moves
to the next item. Select a mode.
Example) Select LCD+CRT
LCD: Notebook Screen
CRT: External Monitor Screen
LCD+CRT: Notebook + External Monitor Screen
TV: TV Screen (connected to the TV OUT port)
LCD+TV: Notebook + TV Screen (connected to the TV-Out port)
In the MS-DOS environment, the picture is displayed to the LCD > CRT, in turns,
and output to a TV/DVI is not supported. In full screen MS-DOS mode of Win-
dows, you cannot change the display device by pressing the shortcut key.
Customizing Your Computer 91