Subaru CROSSTREK 2020 Quick Manual page 34

OPERATING THE VEHICLE
illuminate in yellow. If the switch is pressed once more, the Auto Start-Stop system will
turn on again. The Auto Start-Stop indicator light will then turn off.
When the Auto Start-Stop system is turned OFF, the yellow Auto Start-Stop
indicator light will illuminate in the instrument cluster.
Auto Start-Stop Warning Light
The Auto Start-Stop warning light will illuminate in yellow when initially turning
the ignition switch to the "ON" position. The light will turn off after the engine
has started.
NOTE: If the Auto Start-Stop warning light does not turn off after the engine
has started or is flashing, the Auto Start-Stop system may be malfunctioning. We
recommend that you contact your authorized SUBARU Retailer for an inspection.
INDICATOR PATTERN
Solid green
Solid White
Solid Yellow
Flashing
Yellow
32
CONDITION
This indicator light illuminates when the engine has been
temporarily stopped by the Auto Start-Stop system. It
will turn off when the engine is restarted.
Operational conditions have not been met, the engine
will not stop and this light will illuminate. The light goes
out once the brake pedal is released.
This light indicates that the system has been turned off.
The light will turn off once the system is turned back on.
A fault has been detected with the Start-Stop system.
Please contact your authorized Subaru Retailer.