Turn Signals - Subaru CROSSTREK 2020 Quick Manual

CONTROLS
4 High Beams: Push the lever forward to change from low beam to high beam. If
equipped, this also activates the High Beam Assist (HBA) system. Pull the lever back
to center to return to low beam.
5 Fog Lights: If equipped, rotate the dial to turn on the fog lights.
Illumination Brightness
While the light switch is on, rotating the dial on the instrument panel
upward will make the instrument panel illumination brighter. When
the dial is fully rotated upward (dots aligned), the instrument panel
illumination stays at full brightness. Rotating the dial downward
dims the instrument panel illumination.
For map equipped vehicles, this setting also affects the day/night
view and illumination level.
Daytime Running Lights
The daytime running lights automatically turn on when the engine has started, the parking
brake is fully released, the light switch is in the Off, "AUTO" (if equipped) or "
position, and the select lever is not in the "P" position. Always turn on the headlights when
it's dark outside by rotating the dial to the "

TURN SIGNALS

Push slightly up for right lane change or fully
up for right turn signal. Push slightly down for
left lane change or fully down for left turn
signal.
22
" or "AUTO" position.
"