Panasonic Lumix S5 Operating Instructions Manual page 113

3
Select the position to display.
≥Press 3421 to select and then
press
You can also move using touch
0
operations.
To return the waveform or vector scope
0
position back to the center, press [DISP.].
Screen Displays
The range between 0 and 100 shows dotted lines at intervals of 10.
¢ Dotted line
Display example)
The waveform displayed on the camera indicates the luminance as values based on
0
the conversions below:
0 % (IRE): Luminance value 16 (8-bit)
100 % (IRE): Luminance value 235 (8-bit)
You can also change the position by dragging on the recording screen.
0
Waveforms cannot be output over HDMI.
0
or .
10. Recording Videos
(%, IRE (Institute of Radio Engineers))

109
100
50
0
4

DVQX2068 (ENG)
113