Panasonic Lumix S5 Operating Instructions Manual page 104

10. Recording Videos
2
Select [Time Code].
[
≥
[Time Code
Displays the time code on the recording screen/playback screen.
Display]
[REC RUN]
[Count Up]
[FREE RUN]
[Reset]
[Manual
[Time Code
Input]
Value]
[Current
Time]
[DF]
[Time Code
[NDF]
Mode]
0
Time code information is added to images output via HDMI when
recording with the [
0
[HDMI Time
Code Output]
0
104
DVQX2068 (ENG)
] [ ] [Time Code]
Counts the time code only when recording videos.
Counts the time code also when video recording is
stopped and when the camera is turned off.
Sets to 00:00:00:00 (hour: minute: second: frame)
Manually input hour, minute, second and frame.
Sets hour, minute and second to current time and
sets frame to 00.
Drop Frame. The camera modifies the difference
between recorded time and time code.
Seconds and frames are separated by ".".
0
(Example: 00:00:00.00)
Non-Drop Frame. Records the time code without
drop frame.
Seconds and frames are separated by ":".
0
(Example: 00:00:00:00)
When the following functions are being used, [Time Code Mode]
is fixed to [NDF]:
– [PAL] ([Switch NTSC/PAL])
– 24p [Rec Quality]
The time code can also be output via HDMI by setting the mode
dial to [ ] during playback. In the [Setup] ([IN/OUT]) menu,
set [HDMI Mode (Playback)] in [TV Connection] to [AUTO].
The device screen may go dark depending on the connected
device.
] mode.