WARNING:
tank into the valve or the plumbing. In the ¼ open position, you should
hear air slowly escaping from the valve drain line.
NOTE: 263 Filter - advance control back to the treated water position,
proceed to Step 12.
NOTE: We recommend that you do not put regenerant into the tank
until after the control valve has been put into operation. With no
regenerant in the tank, it is much easier to view water flow and motion
in the tank.
Action
Key
Display current
SET
cycle
Advance to next
SET and UP
cycle
Cancel
SET and UP
regeneration
Duration
Display
5 Sec.
Current cycle
Press and
Next cycle
release
5 Sec.
Regeneration
canceled