Samsung SyncMaster NC190 User Manual page 62

Did you change the graphics card or the driver?
Did you change the resolution and frequency appropriate to
the product?
Is the graphics card configured correctly?
Did you change the resolution and the frequency appropriate
to the product?
The color is displayed in 16 bit (16 colors). The color has been changed after changing the graphics card.
Did you install the device driver for the product?
Is the graphics card configured correctly?
When I connect the monitor, the 'Unknown monitor, Plug&Play (VESA DDC) monitor found' message is displayed.
Did you install the device driver for the product?
Check if all the Plug&Play (VESA DDC) functions are sup-
ported referring to the User Manual of the graphics card.
If the beep sound is generated 3 or more times when booting up the computer, please request service for the computer.
No sound
Sound level is too low.
5-2
The display area suddenly moves to an edge or to the center.
The pictures are out-of-focus.
A "beep, beep" sound is heard when booting the computer.
Problems related to Audio
Please press the [AUTO] button to run the auto adjustment
function.
Set the resolution and the frequency to the appropriate values
in the graphics card
Refer to the (Standard Signal Mode Table)
Set up the graphics card referring to the user manual.
Set the resolution and the frequency to the appropriate values
in the graphics card
Refer to the (Standard Signal Mode Table)
Windows ME/XP/2000 : Set the color again by selecting Con-
→ →
trol Panel Display Settings.
Configure the color again in accordance with the new graph-
ics card driver.
Install the device driver referring to the descriptions about the
driver installation.
Install the device driver referring to the descriptions about the
driver installation.
Ensure that the audio cable is firmly connected to both the
audio-in port on your monitor and the audio-out port on your
sound card.
Check the volume level.
Check the volume level.
If the volume is still too low after turning the control to its max-
imum, check the volume control on the computer sound card
or software program.
Troubleshooting