Samsung SyncMaster NC190 User Manual page 54

18.5" nc190 pcoip monitor
Hide thumbs Also See for SyncMaster NC190:
Table of Contents

Advertisement

<Repeat Settings Test Box >
The <Repeat Settings Test Box> field allows a user to test the chosen keyboard settings.
<Image>
The <Image> allows a user to change the image settings on the PCoIP system.
The Image parameters can also be configured using the Webpage Administration Interface.
Figure
2-21
: <Image>
<Minimum Image Quality>
The <Minimal Image Quality> slider allows a user to make compromises between image quality and frame rate when
network bandwidth is limited. Some usage cases may require lower-quality images at a higher frame rate, while in other
cases higher-quality images at a lower frame rate may be preferred.
In environments where network bandwidth is constrained, moving the slider towards <Reduced> allows higher frame
rates; moving the slider towards <Perception-Free> allows higher image quality.
When network bandwidth is not constrained, the PCoIP system will maintain <perception-free> quality regardless of the
<Minimum Image Quality> setting.
<Password> Window
The <Password> window allows an administrator to update the administrative password for the device. Note that this will affect
the web interface and the local <OSD> GUI.
Care must be taken when updating the Portal Password as the Portal may become unusable if the password is lost.
The Password can also be updated using the Webpage Administration Interface.
Some PCoIP devices have password protection disabled by default and this <Password> window is not available.
Password protection can be enabled through PCoIP Management Console for these devices.
Figure
2-22
: <Change Password>
4-1
Installing the Software

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Syncmaster nc240Syncmaster nc190-1

Table of Contents