Setting Up The System Options; Setting Up The Language Features - Samsung DVD-C510 User Manual

Surround Sound Speaker Setup (Only DVD-C550K)
1. With the unit in Stop mode, press the MENU button. Press the
press the ENTER button.
2. Press the buttons to select AUDIO, then press the
/
3. Press the / buttons to select SPEAKER SETUP, then press the
4. Press the / / / buttons to select the desired item, then press the ENTER button to set the speaker.
The default settings : FRONT L, R (Small), CENTER (Small), SURROUND (Small). Select the size of the speakers
to be connected.
❶ Front (FL, FR)
- Large
- Small
❷ Center
- None
- Large
- Small
❸ Surround (SL, SR)
- None
- Large (Rear/Side)
- Small (Rear/Side)
Setting up Test
The test output signals come clockwise starting from the Front Speaker(L).
Adjust Channel Balance so that speakers output equally in your room.
FRONT(L) ➝ CENTER ➝ SUBWOOFER ➝ FRONT(R) ➝ SURROUND(R) ➝ SURROUND(L)
Note :
- When play a disc that has MPEG Audio and you have Bitstream selected in the Audio Options menu,
the Digital Audio jack may not output audio
- There is no analogue audio output when you play a DTS sound disc.
- Even when PCM Down sampling is Off
• Some discs will only output down sampled audio through the digital outputs.
HDMI
- If your TV is not compatible with compressed multi-channel formats (Dolby Digital, DTS, MPEG),
you should set Digital Audio to PCM.
- If your TV is not compatible with LPCM sampling rates over 48kHz, you should set PCM Down
sampling to On.
Manufactured under licence from Dolby Laboratories. "Dolby" and the double-D symbol are trade-
marks of Dolby Laboratories.
"DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
buttons to select SETTING, then
or ENTER button.
or ENTER button.

Setting Up the System Options

1. With the unit in Stop mode, press the MENU button. Press the
press the ENTER button.
2. Press the / buttons to select SYSTEM, then press the
3. Press the / buttons to select the desired item, then press the
Setting Up the Anynet+(HDMI-CEC)
Anynet+ is a function that can be used to operate the unit using a Samsung TV remote control, by con-
necting the DVD C510/C550/C550K to a SAMSUNG TV using a HDMI Cable. (This is only available with
SAMSUNG TVs that support Anynet+.
Select On when you connect the DVD C510/C550/C550K with Samsung TV that support Anynet+.
1. With the unit in Stop mode, press the MENU button. Press the
press the ENTER button.
2. Press the / buttons to select SYSTEM, then press the
3. Press the buttons to select ANYNET+ (HDMI-CEC), then press the
/
4. Set the Anynet+(HDMI-CEC) to "On" on your DVD Player, then press the ENTER button.
5. Set the Anynet+ function at your TV. (See the TV instruction manual for more information.).
• When you press Anynet+ button on the TV remote control, the below OSD will appear.
Note
• By pressing the PLAY button of the unit while watching TV, the TV screen will change to the play screen.
• If you play a DVD when the TV power is off, the TV will power On.
• If you turn the TV off , the DVD Player will power off automatically.
• If you change the HDMI to other sources (Composite,Component,... etc) in TV while playing the DVD disc, the
DVD Player will stop playing.

Setting Up the Language Features

If you set the player menu, disc menu, audio and subtitle language in advance, they will come up auto-
matically every time you watch a movie.
1. With the unit in Stop mode, press the MENU button. Press the
press the ENTER button.
2. Press the / buttons to select LANGUAGE, then press the
3. Press the / buttons to select the desired language, then press the ENTER button.
Note
- The language is selected and the screen returns to Language Setup menu.
- To make the setup menu disappear, press the MENU button.
- If the selected language is not recorded on the disc, the original pre-recorded language is selected.
- Select "Original" if you want the defaultsoundtrack language to be the original language the disc is
recorded in.
- Select "Automatic" if you want the subtitle language to be the same as the language selected as the
audio language.
- Some discs may not contain the language you select as your initial language; in that case the disc will use its
original language setting.
/ buttons to select SETTINGS, then
or ENTER button.
or ENTER button.
/ buttons to select SETTINGS, then
or ENTER button.
or ENTER button.
/ buttons to select SETTINGS, then
or ENTER button.
11