Listening To Radio - Samsung HT-TX22 Instruction Manual

Listening to Radio

Remote Control
1
Press the TUNER button to select the FM band.
2
Tune in to the desired station.
 Automatic Tuning 1 : When the #,$ button is pressed, a preset broadcast station is
selected.
 Automatic Tuning 2 : Press the and hold .,, button to automatically
search for active broadcasting stations.
 Manual Tuning : Briefl y press the .,, button to increase or decrease the
frequency incrementally.
Main Unit
1
Press the FUNCTION button to select the FM band.
2
Select a broadcast station.
 Automatic Tuning 1 : Press the STOP () button to select PRESET and
then press the #,$ button to select the preset station.
 Automatic Tuning 2 : Press the STOP () button to select <MANUAL>
and then press the and hold #,$ button to automatically search the band.
 Manual Tuning : Press the STOP () button to select <MANUAL> and
then briefl y press the #,$ button to tune in to a lower or higher frequency.
d Press the MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
 Each time the button is pressed, the sound switches between <STEREO> and
<MONO>.
 In a poor reception area, select <MONO> for a clear, interference-free broad-
cast.
54
Presetting Stations
Example : Presetting FM 89.10 in the memory
1
Press the TUNER button to select the FM band.
2
Press the .,, button to select <89.10>.
3
Press the TUNER MEMORY button.

<PRGM> fl ashes in the display.
4
Press the #,$ button to select preset number.
 You can select between 1 and 15 presets.
5
Press the TUNER MEMORY button again.

Press the TUNER MEMORY button before <PRGM> disappears from the display.
 <PRGM> disappears from the display and the station is stored in memory.
6
To preset another station, repeat steps 2 to 5.
d To tune in to a preset station, press the #,$ button on the remote control
to select a channel.
• This unit does not receive AM broadcasts.
GB
55