Setting The Test Tone; Setting The Audio - Samsung HT-TX22 Instruction Manual

Digital home cinema system
Hide thumbs Also See for HT-TX22:
Table of Contents

Advertisement

Settings
(Con't)

Setting the Test Tone

Use the Test Tone feature to check the speaker connections.
1
In Stop mode, press the MENU button.
2
Press the Cursor ▼ button to move to <Audio> and then press the ENTER button.
3
Press the Cursor ▼ button to move to <TEST TONE> and then press the
ENTER button.
The test tone will be sent to L
If the ENTER button is pressed again at this time, the test tone will stop.
d Press the RETURN button to return to the previous level.
d Press the MENU button to exit the setup screen.
Alternate method : press the TEST TONE button on the remote.
Multi-Channel Pro Logic Mode
Press the TEST TONE button.
Start
d To end the test tone, press the TEST TONE button again.
L: Front Speaker (L) C: Center Speaker
SW: Subwoofer
R: Front Speaker (R) SL: Rear Speaker (L) SR: Rear Speaker (R)
48
C
R
SR
SL
SW in order.
Test tone will be produced as follows:
When playing a DVD or CD, this will work only in Stop mode.
Use this function to check that each speaker is correctly connected
and that there is no problem.

Setting the Audio

You can adjust the balance and level for each speaker.
1
In Stop mode, press the MENU button.
2
Press the Cursor ▼ button to move to <Audio> and then press the ENTER button.
3
Press the Cursor ▼ button to move to <SOUND EDIT> and then press the
ENTER button.
4
Press the Cursor ▲,▼ button to select and adjust the desired item.
Press the Cursor ◄,► button to adjust the settings.
d Press the RETURN button to return to the previous level.
d Press the MENU button to exit the setup screen.
Manually Adjusting the Speaker Volume and Balance with the SOUND EDIT Button.
Press the SOUND EDIT button and then press the Cursor ◄,► button.
Adjusting Front/Rear Speaker Balance
You can select between 00 and –06 and OFF.
The volume decreases as you move closer to –6.
Adjusting Center/Rear/Subwoofer Speaker Level
The volume level can be adjusted in steps from +6dB to –6dB.
The sound gets louder as you move closer to +6dB and quieter as you get closer
to -6dB.
GB
49

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ht-x20Ht-tx25

Table of Contents