Setting Up The Audio Options; Digital Output - Samsung DVD-SH893 User Manual

system setup

SETTing UP THE aUDiO OPTiOnS

You can connect the HDD & DVD Recorder to an external amp or Home theatre.
Allows you to setup the Audio device and sound status depending on the audio system in use.
You can also set NICAM mode.
1. With the unit in Stop mode, press the MEnU button.
. Press the $% buttons to select Setup, then press the OK or +
button.
. Press the $% buttons to select audio, then press the OK or +
button.
. Press the $% buttons to select the desired audio option, then
press the OK or + button.
. Press the $% buttons to select the desired item, then press the
OK or + button.

Digital Output

~ PCM : Select this when your equipment is not decode Dolby Digital
(or MPEG-2) compatible.
Bitstream : Outputs Dolby Digital (or MPEG-2) audio as bitstream.
~
Select this when your AV receiver or AV amplifier has a
Dolby Digital (or MPEG-2) Decoder.
M
`
Digital output setting is equally applied to both Dolby Digital and
MPEG-2 audio. LPCM sound track is always outputted as PCM. It has no relation with Digital Output setting.
`
Be sure to select the correct Digital Output or you will hear no sound or a loud noise.
DTS
Off : Doesn't output DTS signal. Select this when your AV receiver
~
(or AV amplifier) does not have DTS decoder.
On : Outputs DTS Bitstream via digital output when you play DTS
~
track. Select this only when your AV receiver (or AV amplifier)
have DTS decoder.
M
`
When DTS soundtrack is played, sound does not output from
AV Audio Output.
DrC
This is only active when a Dolby Digital signal is detected.
On : When Movie soundtracks are played at low volume or
~
from smaller speakers, the system can apply appropriate
compression to make low-level content more intelligible and
prevent dramatic passages from getting too loud.
Off : You can enjoy the movie with the standard Dynamic Range.
~
_ system setup
HDD & DVD RECORDER
HDD
Library
System
Clock Set
Guide
Language
Channel
Audio
Timer Record
Video
Parental Lock
Disc Manager 1
Recording
Setup
m MOVE sSELECT rRETURN
HDD & DVD RECORDER
HDD
Library
Digital Output : PCM
PCM
Bitstream
DTS : Off
Guide
DRC : On
Channel
NICAM : On
Timer Record
Disc Manager
Setup
m MOVE sSELECT rRETURN
HDD & DVD RECORDER
HDD
Library
Digital Output : PCM
DTS : Off
Off
Guide
DRC On : On
Channel
NICAM : On
Timer Record
Disc Manager
Setup
m MOVE sSELECT rRETURN
HDD & DVD RECORDER
HDD
Library
Digital Output : PCM
DTS : Off
Guide
DRC Off : On
Channel
On
NICAM : On
Timer Record
Disc Manager
Setup
m MOVE sSELECT rRETURN
Setup
►
►
►
►
►
►
►
eEXIT
Audio
✔ ►
►
►
►
eEXIT
Audio
►
✔
►
►
►
eEXIT
Audio
►
►
►
✔
►
eEXIT