Verify Download And Readback; Interactive Mode Commands; Batch - Execute In Batch Mode - Xilinx EZTag User Manual

EZTag with Workstations
Table 4-1 Valid Ports for the XChecker Cable
*Use with the parallel download cable only.
**ttya and ttyb must be readable and writable to ensure a proper connection.
–v Verify Download and Readback
Syntax
Abbreviation
The Verify Download and Readback option executes a download and
readback of the current EPLD design for verification. EZTag reads the
configuration from the EPLD and compares it to the original
bitstream. If you do not specify this option, readback is not executed
after configuration.

Interactive Mode Commands

This section describes the EZTag interactive mode commands. To use
the interactive mode commands, you enter eztag at the system
prompt.
Note: You can abbreviate the commands using the least number of
distinctive characters, as with the command line options, but you
must use at least two characters. You can repeat the previous
command using either an equal sign, "=," or an exclamation point, "!."
Batch — Execute in Batch Mode
Syntax
Abbreviation
4-6
Platform
IBM PC com1
NEC PC com1
Sun /dev/ttya**
HP700 /dev/tty00
–v
v
batch bat_file.cmd
bat
Communication Ports
com2 lpt1*
/dev/ttyb**
/dev/tty01
Xilinx Development System
lpt2*