Picture Mode - Samsung CW-21Z413N Owner's Instructions Manual

Picture - Mode
◆ Mode: Dynamic/
TV
Standard/Movie/Custom Mode
Contrast
You can select the type of
Brightness
Sharpness
picture which best
Colour
Tint
corresponds to your viewing
Colour Tone : Cool1
requirements. Reset
➢
Move
You can select these
options simply by pressing the P.MODE button on
the remote control.
◆ Contrast/Brightness/Sharpness/Colour/
Tint(NTSC only)
The television has several settings which allow you to
control the picture quality.
◆ Colour Tone: Cool2/Cool1/Normal/Warm1/
Warm2
◆ Reset
You can return to the factory defaults.
The reset function is set for each mode (Dynamic,
Standard, Movie, or Custom).
Picture - Digital NR / Tilt
◆ Digital NR
TV
If the signal received by the
Mode
television is weak, you can
Digital NR
Tilt
activate this feature to
PIP
reduce any static and
ghosting that may appear on
the screen.
Move
◆ Tilt (depending on the model)
If you find that the picture received is slightly tilted to one
side, you can adjust the tilt setting (-7 to +7).
Picture - PIP
You can display a sub picture within the main picture of TV
Mode
√ √ programme or external A/V devices such as VCR or DVD. In
: Dynamic
: 100
this way you can watch TV program or monitor the video
: 50
: 75
input from any connected devices while watching TV or other
: 50
: G 50 R 50
video input.
√ √
√ √
TV
Enter Return
Mode
Digital NR
Tilt
PIP
Move Enter
◆ PIP: On/Off
You can activate or deactivate the PIP funtion. 1 1
◆ Source
You can select a source of the sub-picture. 2 2
➢
Depending on the models, the sub-picture can be
viewed only when a source different from the main
picture's is selected. If a TV programme is viewed
on the main picture, the sub-picture is not available
for TV programmes. If a TV source is selected, the
message Not Available is displayed.
◆ Swap
You can interchange the main picture and sub-picture. 3 3
◆ Size: Small/Large
You can select a size of the sub-picture.
◆ Position:
You can select a position of the sub-picture.
◆ Programme
Picture
You can select a channel of the sub-picture only when
√ √
: Dynamic
: Off √ √
the Source is set to TV.
: 0
√ √
Easy functions of the remote control
Enter Exit
(depending on the model)
Picture
TV
√ √
: Dynamic PIP : On
√ √
: Off Source : TV
: 0 Swap
√ √
Size : Large
Position :
Programme : P 1
Exit Move Enter Return
/ / /
You can freeze the sub-picture.
English - 6
Sound -
Mode / Equalizer /
Auto Volume / Pseudo Stereo /
Turbo Plus
◆ Mode: Standard/Music
PIP
/Movie/Speech/Custom
√ √
You can select the type of
√ √
√ √
special sound effect to be
√ √
used when watching a given
√ √
√ √
broadcast.
➢
You can select these
options simply by pressing the S.MODE button on
the remote control.
◆ Equalizer
The television has several settings which allow you to
control the sound quality.
➢
If you make any changes to these settings, the
sound mode is automatically switched to Custom.
◆ Auto Volume
Each broadcasting station has its own signal conditions,
and so it is not easy to adjust the volume every time the
channel is changed. This feature lets you automatically
adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by
raising the sound output when the modulation signal is
low.
◆ Pseudo Stereo
This feature converts a monaural sound signal into two
identical left and right channels. Once the Pseudo
Stereo is set to On or Off, these settings apply to the
sound effects such as Standard, Music, Movie, and
Speech.
◆ Turbo Plus
This feature suitably emphasizes both higher and lower
bands of sound (and includes other effects). You can
enjoy more magnificent and dynamic sound when
watching music, movie, or other channels.
➢
You can change the options simply by pressing the
TURBO button on the remote control.
Sound
TV
√ √
Mode : Standard
√ √
Equalizer
√ √
Auto Volume : Off
√ √
Pseudo Stereo : Off
√ √
Turbo Plus : Off
Move Enter Exit