Viewing The Menus; Important Warranty Information Regarding Television Format Viewing - Samsung CW-21Z413N Owner's Instructions Manual

Viewing the Menus

1 Press the MENU button.
The main menu is displayed on the screen. Its left side
has five icons: Input, Picture, Sound, Channel, and
Setup.
Press the ... or † button to select one of the icons.
2
Press the ENTER button to access the icon's sub-menu.
Press the ... or † button to move to items in the menu.
3
Press the ENTER button to enter items in the menu.
Press the .../†/œ/√ button to change the selected
4
items. Press the MENU button to return to the previous
menu.
5 Press the EXIT button to exit from the menu.
Setup - Plug & Play
When the television is initially powered on, several basic
customer settings proceed automatically and subsequently.
The following settings are available.
1 If the television is in standby
mode, press the POWER
Start Plug & Play
button on the remote
control.
Enter
The Start Plug & Play
is displayed. To start Plug &
Language
Play, press the ENTER
English
button. The Language
Deutsch
Français
menu is displayed.
Nederlands
➢
Español
The Language menu
Italiano
will automatically
Move
appear after several
seconds, even if the ENTER button is not pressed.
2 Select the appropriated
language by pressing the ...
Check antenna input.
or † button. Press the
ENTER button.
Enter
The Check antenna
input. is displayed.
➢
If any language is not selected, the language menu
will disappear about 30 seconds later.
3 Make sure that the antenna
is connected to the
television (refer to page 1).
Press the ENTER button.
The Country menu is
displayed.
Press the ... or † button to
4
select your country. Press
the ENTER button.
5 To search the channels,
press the ENTER button. To
stop the search, press the
ENTER button.
When the channel
searching has finished, the
Clock Set menu is
displayed.
Press the œ or √ button to
6
move to the hour or minute.
Set the hour or minute by
pressing the ... or † button.
7 When you have finished,
press the MENU button.
The Enjoy your
viewing. is displayed, and then the channel which has
been stored will be activated.
Re-setting the Plug & Play
Method: MENU ➜ ... ... /† †
Plug & Play
(Setup) ➜ ENTER ➜ ... ... /† †
(Plug & Play) ➜ ENTER
OK
Return
Plug & Play
Input
(depending on the model)
Svenska
Source List / Edit Name
Português
∂ÏÏËÓÈο
âe‰tina
Srpski
◆ Source List
† †
You can switch between
Enter Skip
viewing signal from
connected equipment, such
as a VCR, DVD, set-top box,
Plug & Play
and the TV source
(broadcast or cable).
OK ➢
You can change the required external source simply
Skip
by pressing the SOURCE button on the remote
control. It might take a short period of time for
pictures to be switched. To return to the TV mode,
press the TV button on the remote control.
continued...
Plug & Play
Country
Belgie Schweiz
Deutschland Sverige
España UK
France Eastern Europe
Italia Others
Nederland
Move Enter Skip
Plug & Play
Auto Store
Start
Enter Skip
Plug & Play
Auto Store
P 1 C-- ----- 102MHz
7 %
Stop
Enter Skip
Plug & Play
Clock Set - - : - -
Move Enter
Adjust Skip
Enjoy your viewing.
OK
Setup
TV
√ √
Plug & Play
√ √
Language : English
√ √
Time
√ √
Child Lock
√ √
Blue Screen : Off
√ √
Melody : On
√ √
Demonstration
Move Enter Return
-
Source List
TV
TV
EXT1 - - - -
EXT2 - - - -
Move Enter Return
continued...
English - 3
◆ Edit Name
TV
You can give a name to the
EXT1
EXT2
external source.
Move
Important Warranty Information
Regarding Television Format Viewing
Standard screen format televisions (4:3, the aspect ratio of
the screen width to height) are primarily designed to view
standard format full-motion video. The images displayed on
them should primarily be in the standard 4:3 ratio format and
constantly moving. Displaying stationary graphics and
images on screen, such as the dark top and bottom letterbox
bars (wide screen pictures), should be limited to no more
than 15% of the total television viewing per week.
Wide screen format televisions (16:9, the aspect ratio of the
screen width to height) are primarily designed to view wide
screen format full-motion video. The images displayed on
them should primarily be in the wide screen 16:9 ratio
format, or expanded to fill the screen if your model offers this
feature, and constantly moving. Displaying stationary
graphics and images on screen, such as the dark side-bars
on non-expanded standard format television video and
programming, should be limited to no more than 15% of the
total television viewing per week.
Additionally, viewing other stationary images and text such
as stock market reports, video game displays, station logos,
web sites or computer graphics and patterns, should be
limited as described above for all televisions. Displaying any
stationary images that exceed the above guidelines can
cause uneven aging of picture tubes (CRTs) that leave
subtle, but permanent burned-in ghost images in the
television picture. To avoid this, vary the programming and
images, and primarily display full screen moving images, not
stationary patterns or dark bars. On television models that
offer picture sizing features, use these controls to view the
different formats as a full screen picture.
Be careful in the selection and duration of television formats
used for viewing. Uneven CRT aging as a result of format
selection and use, as well as other burned-in images, is not
covered by your Samsung limited warranty.
Edit Name
----
: - - - -
: - - - - VCR
DVD
Cable STB
Sat. STB
AV Receiver
DVD Receiver
† †
Enter Return