Remote Control; Placing The Television In Standby Mode - Samsung CW-21Z413N Owner's Instructions Manual

Remote Control

(depending on the model)
➢
Operation of remote control may be affected by bright
artificial light near to the TV.
1 1 POWER 3 3 -/--
Used to switch the TV Used to select a channel
on and off. numbered ten or over.
Press this button, then
2 2 Numeric buttons
"--" symbol is
Used to select channels
displayed. Enter the
directly.
two-digit channel
number.
4 4 $ $ EXIT
/
Used to increase or Used to exit from any
decrease the volume. display or return to
normal viewing.
5 5 MENU
% % MUTE
Used to display the on-
Used to switch the
screen menu or return to
sound off temporarily. To
the previous menu.
turn the sound back on,
6 6 ... ... / † † / œ œ / √ √
press the MUTE,
Used to control the
button.
cursor in the menu.
^ ^ ENTER
7 7 S.MENU
While using the on-
Used to display the
screen menus, press the
sound menu.
ENTER button to
8 8 TURBO
activate (or change) a
Used to select the turbo particular item.
sound option.
& & S.MODE
9 9 DUAL I-II
Used to select the
Used to select the
sound effect.
sound mode.
* * P.MODE
0 0 SOURCE
Used to select the
Used to display all of the picture effect.
available video sources.
( ( TV
! ! INFO
Used to return to the TV
Used to view the
mode when it is in
channel information and
external input mode.
setting status you
) ) SLEEP
selected.
Used to select a preset
@ @ PRE-CH
time interval for
Used to switch
automatic turn off.
repeatedly between the
last two channels
displayed.
# # P
/
Used to display the next
or previous stored
channel.
Installing Batteries
Remove the cover. Install two AAA
size batteries, then replace the cover.
When the remote control does not
operate normally, check that the "+"
and "-" ends of the batteries are inserted correctly or the
batteries are drained.
➢
Do not mix battery types, i.e. alkaline and manganese.
English - 2
Switching the Television On and Off
The mains lead is attached to the rear of the television.
1 Plug the mains lead into an appropriate socket.
➢
The main voltage is indicated on the rear of the
television and the frequency is 50 or 60Hz.
2 Press the " I " button (On/Off) on the front (or side) of the
television.
, or 3 Press the POWER button on the remote control to
switch the television on. The programme that you were
watching last is re-selected automatically. If you have
not yet stored any channels, no clear picture appears.
Refer to "Channel - Auto Store" or "Channel - Manual
Store" on page 4.
➢
If the television is initially powered on, several basic
customer settings proceed automatically. Refer to
"Setup - Plug & Play" on page 3.
4 To switch the television off, press the " I " button (On/Off)
on the front (or side) of the television.

Placing the Television in Standby Mode

The television can be placed in standby mode, in order to
reduce power consumption and wear of the cathode ray
tube. Standby mode can be useful when you wish to
interrupt viewing temporarily (during a meal, for example).
1 Press the POWER button on the remote control while
viewing.
The television is in standby mode.
2 To switch the television back on, simply press it again.
☛
Do not leave the television in standby mode for long
periods of time (when you are away on holiday, for
example). Turn the television off by pressing the
button (On/Off) on the front (or side) of the television. It
is best to unplug the set from the mains and aerial.
" I "