Plug & Play Feature - Samsung CS-29A10HE Owner's Instructions Manual

Plug & Play Feature
Plug & Play
TV Setup
Plug & Play
œ œ English
Language
Time
Blue Screen : Off
Melody : 0n
Demonstration
œ œ √ √
Adjust
Check antenna input.
œ œ √ √
Move Skip
TV Auto Store
œ œ ASIA/W.EUROPE √ √
Area
Search : -/+
œ œ √ √
Move Adjust
TV Time
Clock -- : -- am
Sleep Timer : Off
On Timer -- : -- am Off
Off Timer -- : -- am Off
On Timer Volume :
On Timer Channel :
œ œ √ √
Move Adjust
Enjoy your watching.
TV Setup
Plug & Play
Language : English
Time
Blue Screen : Off
Melody : 0n
Demonstration
Move Enter
English - 12
When the television is initially powered on, three basic customer
settings proceed automatically and subsequently: setting the
language, channel and clock.
1
If the television is in Standby mode, press the POWER ( ) button
on the remote control.
√ √
Result:
√ √
√ √
2 Select the appropriate language by pressing the œ or √ button.
√ √
Press the MENU (
Skip
Result:
➢
3
Make sure that the antenna is connected to the TV.
Press the œ or √ button.
Result:
4 Select your country by pressing the œ or √ button. To search the
channels, select Search by pressing the ▲ or ▼ button, then
press the œ or √ button. Press the MENU (
search.
Result:
➢
Skip
Press the œ or √ button to move to the hour or minute. Set the
5
hour or minute by pressing the ▲ or ▼ button.
➢
6
When you have finished, press the MENU (
0
P 1
Result:
Skip
7
If you want to reset this feature...
1
2 Press the ▲ or ▼ button to select Setup, then press the
√ √
√ √
3 Press the ENTER (
√ √
Return
The message Plug & Play is displayed. It flickers for
a little while, then Language menu is automatically
displayed.
) button to enter the language.
The message Check antenna input. is displayed.
If any language is not selected on the Language menu, the
Language menu will disappear about 30 seconds later.
The Auto Store menu is displayed with Area is
selected.
The Time menu is displayed with Clock is selected.
Refer to "Storing Channels Automatically" on page 14.
Refer to "Setting and Displaying the Current Time" on page
31.
The message Enjoy your watching. is displayed,
then the channel which has been stored will be
activated.
Press the MENU ( ) button.
ENTER ( ) button.
Result: The Plug & Play is selected.
) button again.
Result: This feature starts with the message Plug & Play
is displayed.
➢
When you wish to exit from the Plug & Play, press
the EXIT ( ) button on the remote control.
) button to stop the
) button.