Plug & Play Feature (Depending On The Model) - Samsung CW29M064 Owner's Instructions Manual

ENG
Plug & Play
Language
English
Deusch
Français
Nederland
Español
Adjust
Ant. Input : Check
Exit
P 1 - - - - -
471 MHz
Exit
Time
Clock
Move
ENJOY YOUR WATCHING
Language : English
Time
Plug & Play
Blue Screen
Child Lock
Demonstration
Select Enter
Plug & Play Feature
Português
Italiano
Sverige
Türkçe
EÏÏËÓÈο
Select
48 %
11 : 35
Exit
Function
√
√
: Off
√
√
Exit
12
(depending on the model)
When the television is initially powered ON, three basic customer
settings proceed automatically and subsequently: setting the
language, channel and clock.
1
If the television is in Standby mode, press the POWER (
on the remote control.
Result: The message Plug & Play is displayed. It flickers for a
little while and then the "Language" menu is automatically
displayed.
2 Press the ▲ or ▼ button to select required language. Press the
MENU ( ) button to enter the language, and then the message
Ant. Input : Check is displayed.
➣
If any language is not selected on the Language menu, the
"Language" menu will be displayed about 30 seconds later.
3
Make sure that the antenna is connected to the TV. And then press
the œ or √ button to store the channels (refer to "Storing the
Channels Automatically" on page 14).
Result: The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range.
4
When searching and storing is complete, the Time menu is
displayed.
5
Press the œ or √ button to move to the hour or minute. Set the
hour or minute by pressing the ▲ or ▼ button (refer to "Setting and
Displaying the Current Time" on page 31).
6
When you have finished, press the MENU (
Result: The message ENJOY YOUR WATCHING is displayed, and
then the channel which has been stored will be
activated.
7
If you want to reset this feature...
Press the MENU (
1
Press the ▲ or ▼ button to select the Function, and then
2
press the œ or √ button.
Select the Plug & Play by pressing the ▲ or ▼ button, and
3
then press the œ or √ button.
Result: The message Plug & Play is displayed.
) button.
) button.
) button