Hyundai i20 Owner's Manual page 202

Convenient features
To defrost outside windshield
1. Set blower speed to the highest
position.
2. Set temperature to the extreme hot
(HI) position.
3. Press the defroster button (
4. The air-conditioning will turn on
according to the detected ambient
temperature and fresh mode will be
selected automatically.
If the position is selected, lower
blower speed is controlled to higher
blower speed.
6-74
Auto defogging system (only
for automatic climate control
system, if equipped)
OBI3050118 OBI3050118
Auto defogging helps reduce the
possibility of fogging up the inside of the
).
windscreen by automatically sensing the
moisture on inside the windscreen.
The auto defogging system operates
when the heater or air conditioning is on.
If a high amount of humidity is detected
in the vehicle, the Auto Defogging
System will be enabled.
The following steps will be performed
automatically:
Step 1) The A/C button will turn ON.
Step 2) The air intake control will change
Step 3) The mode will be changed to
Step 4) The blower speed will be
When the Auto Defogging
System operates, the indicator
will illuminate.
to Fresh mode under low outside
temperature.
defrost to direct airflow to the
windscreen.
increased.
OBC3050124 OBC3050124