Hyundai i20 Owner's Manual page 105

Electronic Stability
Control (ESC) Indicator
Light (if equipped)
This indicator light illuminates:
• When you set the ignition switch to
the ON position.
- It illuminates for approximately 3
seconds and then goes off.
• When there is a malfunction with the
ESC system.
In this case, we recommend that you
have the vehicle inspected by an
authorized HYUNDAI dealer.
This indicator light blinks:
• While the ESC is operating.
For more details, refer to "Electronic
Stability Control (ESC)" in chapter 6.
Electronic Stability
Control (ESC) OFF
Indicator Light
(if equipped)
This indicator light illuminates:
• When you set the ignition switch to
the ON position.
- It illuminates for approximately
3 seconds and then goes off.
• When you deactivate the ESC system
by pressing the ESC OFF button.
For more details, refer to "Electronic
Stability Control (ESC)" in chapter 6.
Glow Indicator Light (for
diesel engine)
This indicator light illuminates:
• When the engine is being preheated
with the ignition switch or Engine
Start/Stop button in the ON position.
- The engine can be started after the
glow indicator light goes off.
- The illumination time varies
depending on the with the
engine coolant temperature, air
temperature, and battery condition.
If the indicator light remains on or blinks
after the engine has warmed up or while
driving, there may be a malfunction with
the engine preheating system.
In this case, we recommend that you
have the vehicle inspected by an
authorized HYUNDAI dealer.
Information
i
If the engine does not start within 10
seconds after the preheating is completed,
set the ignition switch or Engine Start/
Stop Button to the LOCK or OFF position
for 10 seconds and then to the ON
position in order to preheat the engine
again.
05
5-15