External View And Internal Structure - Sharp MX-2314N Service Manual

MX-3114N

[4] EXTERNAL VIEW AND INTERNAL STRUCTURE

1. External view
No. Name
1 Automatic document feeder
2 Front cover
3 Output tray (center tray)
4 Operation panel
5 Exit tray unit (right exit tray)*
1
6 Finisher*
7 USB connector (A type)
1
8 Keyboard*
9 Tray 1
10 Tray 2 (When a paper feed tray is installed
or the Stand/500&2000 sheet paper drawer
is installed) *1
11 Tray 3 (When a paper feed tray is installed
or the Stand/500&2000 sheet paper drawer
is installed) *1
12 Tray 4 (When a paper feed tray is installed
or the Stand/500&2000 sheet paper drawer
is installed) *1
*1: Peripheral device.
This automatically feeds and scans multiple originals.
Both sides of 2-sided originals can be automatically scanned.
Open this cover to switch the main power switch to "On" or "Off" or to replace a toner cartridge.
Output is delivered to this tray.
This is used to select functions and enter the number of copies.
1
When installed, output can be delivered to this tray.
This can be used to staple output. A punch module can also be installed to punch holes in output.
Supports USB 2.0 (Hi-Speed).
This is used to connect a USB device such as USB memory to the machine.
For the USB cable, use a shielded cable.
Use this as a substitute for the soft keyboard displayed on the touch panel.
When not being used, it can be stored under the operation panel.
This holds paper.
This holds paper.
This holds paper.
This holds paper.
MX-3114N EXTERNAL VIEW AND INTERNAL STRUCTURE 4 – 1
Service Manual
Function/Operation